Bolt ASSA 575

Application

Used on side-hung doors, which are operated from the outside, inside or both.

Features

  • Two point locking which can be supplemented with one or more side bolts, ASSA 244, page J 196.
  • Fits both right and left versions, by moving the stop link of the lock housing.
  • The stop link limits the handle movement between open and closed positions.
  • Travel is 28 mm for each bolt bar.
  • ASSA 575 is prepared for locking from the inside with a pushbutton cylinder, ASSA 2940, page H 165.

Construction 
a) Lock housing.
b) Bolt bars, 13 mm square.
c) Bar guides.
d) Inner handle. 

Material

  • Rower and handle bearing of zincaluminium.
  • Other parts of galvanized steel.

Instructions for milling

Surface mounting. Mounting instructions are included in the lock housing package.

Standard lengths

  • 2075, 2475, 2975 mm.
  • Handle height 1100 mm. Measurements relate to mounted bolt in open position.
  • Total length of the upper bar (ASSA 723): 939 mm (ASSA 0723 3093), 1339 mm (ASSA 0723 3133), 1839 mm (ASSA 0723 3183).
  • Total lower bar: length: 1064 mm (Fix 0722, 3106).
  • Upper bar end bevelled and bent 7 mm.
  • Lower bar end is turned and bent 7 mm.

Accessories

Inner handle ASSA 2858, of galvanized steel. Grab bolt ASSA 564.
Side bolt ASSA 244.
Bar guide ASSA 354/13, 2 pcs. included in lock housing package.
Receiver ASSA 351/13, 1 pcs. included in the lock housing package.

When ordering, please state:

  • 1. Standard length, or for made-to- measure: total bolt length (mounted and in open position), and handle height (from bottom edge of bar to centre of handle rower).
  • 2.Handle item number.
  • 3. Other accessories. Unless otherwise ordered, delivery includes made-to-measure bolt with bar adaption like description for standard lengths. But for inward- opening doors, unbent upper bars are supplied.

Screw

  • For lock housing no. 9 (4.5 mm) TKX / DIN 7995.
  • For bar guide and striker 351 no. 9 (4.5 mm) TKX / DIN 7996.
  • For handle 1710 no. 8 (4.0 mm) TKF / DIN 7995.
  • For grab bolt 564 and side bolt 244 no. 12 (5.5 mm) TKX / DIN 7996. For striker 353 no. 10 (5.0 mm) TKX / DIN 7996.

Do you want to create a safe lock environment?

ASSA OEM has created "The lock guide by ASSA OEM", and it's made to give you knowledge and tips about approved lock sets. We really encouring poeple to read our tips and guidelines here: The lock guide

Want to download our product catalogues?

If you prefer to download our product catalogue - you can download it here
We also provide instructions, declarations and other documents in our download documents section.

Check it out!